Mon-Fr - 10 a.m. - 6 p.m.
Windows for house

Windows for house

Windows for house

Window systems

 

Plastic windows should be connected to a common point of work in a number of offices and hosts.

Plastic windows have high efficiency and features and are characteristic for any installation and maintainability.

Own installation of windows in the house garantes the preservation of heat.

Any house should have quality construction for good light and meet needs. When planning a living space, it is important to always be aware of the location of windows in the essence of the world and to take into account some other nuances of their installation.

Window systems
About setvice
3-chamber windows<br>REHAU Euro-Design 60

3-chamber windows
REHAU Euro-Design 60

Profile REHAU Euro-Design 60 has a three-chambered structure and an installation depth of 60 mm.

Подробнее
5-камерні вікна<br> REHAU Euro-Design 70

5-камерні вікна
REHAU Euro-Design 70

Profile REHAU Euro-Design 70 has a five-chamber structure and installation depth of 70 mm.

Подробнее
8-chamber windows<br> REHAU Synego

8-chamber windows
REHAU Synego

Profile REHAU Synego has 8-chamber structure and installation depth of 80 mm.

Подробнее
6-chamber windows<br> Elite REHAU GENEO

6-chamber windows
Elite REHAU GENEO

Profile Elite REHAU GENEO has a 6-chambered structure and an installation depth of 86 mm.

Подробнее
Specifications from 55 €/m² REHAU Euro-Design 60 3-chamber windows from 71 €/m² REHAU Euro-Design 70 5-chamber windows from 100 €/m² 8-chamber windows REHAU Synego from 116 €/m² 6-chamber Elite REHAU GENEO windows
Profile system ecosol 60 REHAU Euro-Design 70 REHAU Synego REHAU GENEO
Number of chambers 3 5 8 6
Profile width 60 70 80 86
Noise isolation от 34 до 42 дБ повышенная
Double-glazed windows Glas Trösch (Швейцария) от 4 до 32 мм Glas Trösch (Швейцария) от 4 до 32 м 44 - 52 мм 44 - 48 - 54мм
Windows 4-16-4 4-14-4-14Ar-4LowE 4-20Ar-4-18Ar-4LowE 4-20Ar-4-20Ar-4LowE
Accessories MACO Multi-Matic с микр. пр. MACO Multi-Matic с микр. пр. MACO Multi-Matic с микр. пр. MACO Multi-Matic с микр. пр.
Thermal resistance 0,373 м2C/Вт 0,854 м2C/Вт 1,08 м2C/Вт 1,05 м2C/Вт
FAQ
  • What do I need to pay attention to when choosing windows?

    When choosing windows in your own private home or cottage – you need to consider and analyze the following factors:

    – energy efficiency and thermal insulation,
    – elements of anti-burglary hardware (whether included in the window system),
    – non-standard sizes and shapes of the windows,
    – window color and additional decorative elements.

    It is also necessary to discuss the window profile. It is made of high quality PVC, which itself is hollow, but divided into chambers filled with air. You can choose the number of chambers yourself, but you must remember that the more of them, the higher the soundproofing and the more heat in the house in winter. We advise you to buy for your own homes at least three-chambered.

    .

  • What is the maximum window opening that can be in a house made of CIP panels?

    The maximum opening can be almost anything. This is where the slab that will be over this window, the beam, and it is made by the constructor, plays a role. We did both 3 and 5 m wide openings, all sorts of split systems. The most important thing is for the designer to calculate how much load will be applied to the window. When we were designing, we had the largest joists, slabs of 300 mm by 200 mm, powerful beams. This is already a separate design, when these large girders, these units are constructed separately from the overall house.

  • How are windows and doors installed in CIP houses?

    Installing windows in CIP houses is the easiest process when compared to any other construction in general (brick, aerated concrete). How does it happen? When we cut a hole for a window, we completely board it up with timber. And then the frame or door, which is put simply on the screws bolted to the door opening and blown foam mounting, then covered with special films, which few people do. But in fact it is necessary to do it necessarily, because people think that blown out, covered with plasterboard and all – but this is wrong. You have to use special films, because ultraviolet light destroys this foam and over the years it will be a cold bridge. But the installation itself is very quick and very easy. And most importantly, all these openings are perfectly flat, so everything happens quickly and well.

  • Why can moisture appear on windows?

    In houses made of CIP panels, windows “cry” for two reasons. The first is high humidity in the house, and the second is poor-quality windows. But this will also happen in houses not only in sandwich panel houses, but also in brick, aerated concrete houses. The most important thing that would be inside the room was normal humidity, comfortable for life, and the windows were made of normal insulating glass. In no case you should not put single-glazed windows and demand that it does not “cry” and keep warm.

Last video
Заливка фундамента под СИП дом
Столбчато-ленточный фундамент под СИП дом
Строительство дома по СИП технологии в Словакии
Работы на участке СИП дом в Словакии
Our works

Site search